:: WIN GRAPH SEALS ::

Graphite Metal Reinforced Sheets

These sheets are are calendered with metal reinforcements to improve handling and blow out resistance.The reinforcements enable high pressure perfformance and troble free service.Thes gaskets are suited for all ypes of flange designs and in many cases replace spiral wound gaskets.Cut Gaskets are available as per various flange standards and custom sizes or drawings.

The following three typers are available.

Flexible Graphite sheet with SS 304/ SS 316 ( 0.05 mm THK) sheet metal reinforcement : Win Graph SGR-SM
Flexible Graphite sheet with SS 304/ SS 316 ( 0.10 mm Thk) perforated sheet metal reinforcement : Win Graph SGR-PSM
Flexible Graphite sheet with SS 304/ SS 316 ( ).19 mm Thk) wiremesh reinforcement : Win Graph SGR-WM

Product Specifications
Sheet Size	:	1000 mm x 1000 mm, 1500 mm x 1500 mm
Density	:	1.0 gms/cc
Thickness	:	1 mm to 3 mm , Custom Sizes available on request
Density	:	0.7 gm/cc, 1.0 gm/cc

Working Temperature
In Oxidizing Atmosphere	:	- 240 to 450 °C
In Steam	:	- 240 to 650 °C
In Non Oxidizing Atmosphere	:	- 240 to 3000 °C
Pressure	:	Full Vacuum to 300 Bar.
Ph Range	:	0 - 14

Technical Specifications (Typical values for Plain and reinforced Sheets)
Compressive Strength	:	As per ASTM 690 -- 30,000 PSI
Tensile Strenth	:	More than 750 PSI (Will be more depending upon reinforcement and number of layers)
Stability Under Stress	:	As per DIN 52913 -- 50 N/m2
ASME Code Factor “M value”	:	2
ASME Code Factor “Y value”	:	900 to 2500 PSI (Will Vary depending upon reinforcement and number of layers)
PxT Factor	:	200,000.
Gas Permeability	:	As per DIN 3535 -- Less than 1.0 ml/min
Tp Max @ 15,000 PSI Gasket Stress	:	1800 PSI (Plain) to 3250 PSI ( Reinforced)
PVRC Design Constants*	:	For Plain and Metal Reinforcement Types.
		Gv - 830 to 1400 PSI
		Gs - 0.01 to 0.70 PSI
		A - 0.30 to 0.40 PSI

	+91-9326470221 /7738618871
	wingraphseals@gmail.com